Servers, Storage and Virtualization · #44

Online Storage Unit Converter (GB/GiB, TB/TiB)

Converts a value into decimal and binary byte units and bit units at once.

  • Data is processed in your browser and not sent to a server

Tool

b = bit, B = byte. Units with 'i' are binary (1024).

What does this tool do?

Disk makers define 1 TB as 1012 bytes, while Windows shows TiB (240 bytes) labelled 'TB'. Network speeds are in bits (Mbit/s), file sizes in bytes. These two confusions are the most common source of errors in capacity and time calculations.

How to use it

  1. Enter the value and its unit; the equivalent in every unit appears in the table.

Fields

Value
Unit
b = bit, B = byte. Units with 'i' are binary (1024).

Worked example

InputValue
Value1
UnitTB (10¹²)

Expected result: 1 TB = 1,000,000,000,000 B ≈ 0.9095 TiB ≈ 931.32 GiB.

A '1 TB' disk shows as about 931 GB in Windows; no space is lost, only the unit differs.

Second scenario

InputValue
Value10
UnitGbit

Expected result: 10 Gbit = 1.25 GB = 1.164 GiB; a 10 Gbit/s link carries at most 1.25 GB per second (excluding protocol overhead).

Method and assumptions

Decimal prefixes are powers of 1000 (SI), binary prefixes powers of 1024 (IEC 80000-13). 1 byte = 8 bits. The calculation runs in bytes.

Using the result and troubleshooting

Stick to one unit in capacity plans; state in purchases and contracts whether TB or TiB is meant. For durations the Backup Window Bandwidth Calculator handles Mbps vs MB/s.

Limits and common mistakes

  • Floating-point precision may round the last digits of very large values.

Frequently asked questions

Are MB/s and Mbps the same?

No. 1 MB/s = 8 Mbit/s. A 1 Gbit/s network carries at most 125 MB/s.

Related tools and service

Related service: Virtualization and Data Management

Systems online tools · See all online tools