Servers, Storage and Virtualization · #44
Online Storage Unit Converter (GB/GiB, TB/TiB)
Converts a value into decimal and binary byte units and bit units at once.
- Data is processed in your browser and not sent to a server
Tool
What does this tool do?
Disk makers define 1 TB as 1012 bytes, while Windows shows TiB (240 bytes) labelled 'TB'. Network speeds are in bits (Mbit/s), file sizes in bytes. These two confusions are the most common source of errors in capacity and time calculations.
How to use it
- Enter the value and its unit; the equivalent in every unit appears in the table.
Fields
- Value
- Unit
- b = bit, B = byte. Units with 'i' are binary (1024).
Worked example
| Input | Value |
|---|---|
| Value | 1 |
| Unit | TB (10¹²) |
Expected result: 1 TB = 1,000,000,000,000 B ≈ 0.9095 TiB ≈ 931.32 GiB.
A '1 TB' disk shows as about 931 GB in Windows; no space is lost, only the unit differs.
Second scenario
| Input | Value |
|---|---|
| Value | 10 |
| Unit | Gbit |
Expected result: 10 Gbit = 1.25 GB = 1.164 GiB; a 10 Gbit/s link carries at most 1.25 GB per second (excluding protocol overhead).
Method and assumptions
Decimal prefixes are powers of 1000 (SI), binary prefixes powers of 1024 (IEC 80000-13). 1 byte = 8 bits. The calculation runs in bytes.
Using the result and troubleshooting
Stick to one unit in capacity plans; state in purchases and contracts whether TB or TiB is meant. For durations the Backup Window Bandwidth Calculator handles Mbps vs MB/s.
Limits and common mistakes
- Floating-point precision may round the last digits of very large values.
Frequently asked questions
Are MB/s and Mbps the same?
No. 1 MB/s = 8 Mbit/s. A 1 Gbit/s network carries at most 125 MB/s.
Related tools and service
- RAID Capacity CalculatorCalculates usable capacity, efficiency and fault tolerance of a RAID array.
- IOPS to Throughput CalculatorRelates IOPS, MB/s and block size and finds the missing value.
Related service: Virtualization and Data Management